What needs to be done before the compound machine is switched on?

Compound machine is more and more widely used with the economic development. Today, the manufacturers of composite machine introduce to you what kind of preparation the machine needs to make before starting.

1. Read the production task sheet carefully, fill in the receipt sheet according to the material name and quantity required by the production task sheet, look for the warehouse keeper to get the corresponding specifications and quantity of composite materials according to the receipt sheet, and confirm whether the printing film has been placed in the prescribed area.

2. Check whether the composite substrate is qualified (check the corona surface, corona value, thickness, width, the appearance of any crystal spots, wrinkles), to confirm whether the printing material needs to be rolled and appearance quality (check with the sample whether there is color difference, check whether the printing film has knife line, ink spots, missed printing, plate damage, dry plate and other undesirable phenomena).

3. Assist the staff in printing and composite materials.

4. Find out the corresponding glue roller according to the product requirements, and check if there are any defects, according to the "composite process record card" technical information to get the corresponding glue and replace the corresponding specifications of the wire roller.

5. Dispose glue according to the specification and proportion of dispensing. Mix the ester sol for 15 minutes and the water glue for 30 minutes.

6. Set the drying temperature, tension, pressure and other parameters according to the technological parameters of "Composite Process Recording Card".

7. Turn on the water, electricity and gas of the machine, check if there are any abnormal conditions such as air leakage, if there are abnormal equipment, report for repair in time.

The above is about the introduction of the compound machine, hoping to help you understand the common knowledge of the compound machine. If you need to know about compound press, gravure press, flexographic press, coating machine and other equipment, welcome to consult Guangdong Olger Precision Machine Technology Co., Ltd. + 86-754-88102266 88103377